Active Digital Paste XA-SIC® DIG RP-20
Keywords:
organic fertilizer
Straw printing paste
- Product Details
-
Product Performance and Features:
- Suitable for cellulose and silk reactive inkjet printing
- Low product viscosity
- Low viscosity of the working slurry
- Suitable for padding, spraying, or roller processing
- High clarity, deep color saturation
- Excellent handling feel
- The sizing agent DIG RP-20 naturally boasts excellent moisture absorption, so it’s not recommended to overuse sodium aluminate.
General physical and chemical properties:
Chemical composition: Chemically modified herbal cellulose, natural plant compounds Ionic nature: Anion Supply Form White powdery substance Density (20°C) Approximately 1.1 g/cm³ 2.5% viscosity (20°C) Approximately 500-800 mPa·s pH value (1% concentration) Approximately 6.5–7.5 Solubility: The mixture dissolves extremely well in water, quickly forming a paste. Applied Technical Documentation
Overview:
XA-SIC® DIG RP-20 is suitable for reactive ink printing.
XA-SIC® DIG RP-20 has low viscosity, making it easy to pump and handle, and highly soluble in water. The prepared working slurry exhibits low viscosity and excellent flow properties, making it ideal for low-viscosity pre-treatment methods such as dip-rolling, spraying, or rotary roll application.
Printed fabrics pre-treated with XA-SIC® DIG RP-20 sizing deliver deep, vibrant colors while maintaining excellent clarity and a pleasant hand feel.
Instructions for Use and Dosage
The dosage of XA-SIC® DIG RP-20 depends on the type of fabric being printed, its specifications, pre-treatment method, ink type, and the specific model of digital printing equipment used.
Under normal circumstances, the recommended dosage for XA-SIC® DIG RP-20 is 20–30 g/L.
You can also choose to use it in combination with the urea alternative XA-SIC®AM Sub-U10, helping to reduce urea consumption.
Recommended process:
Active ink (cellulose fiber, silk):
20–25 g/L XA-SIC® DIG RP-20
10 - 20 g/L XA-SIC®AM Sub-U10 (optional, can be omitted)
20–30 g/L Soda ash or baking soda
0 - 0 g/L Sodium Sulfate (no longer required)
80–120 g/L Urea
3 - 5 g/L Anti-staining Salt
Application scenarios:
- When using XA-SIC® DIG RP-20for pulp preparation, the stirring speed must not be too high.
- Add the required amount of water
- Add baking soda/soda ash and anti-staining salt, and dissolve thoroughly.
- Add XA-SIC® DIG RP-20 while stirring, and slowly mix until fully swollen. If baking soda is added, foaming may occur.
- Urea or its alternative, XA-SIC®AM Sub-U10
- Add a defoamer or foam inhibitor if needed.
- Stir until a uniform working paste is formed
Note: Do not add yuánmíngfěn.
Storage Stability
Available for 12 months from the date of manufacture when stored in a dry, UV-protected environment—check for clumping before use.
Safety Precautions
For operational precautions as well as ecological and toxicological information, please refer to the Material Safety Data Sheet for XA-SIC® DIG RP-20.
Product Specifications:
For product specifications, please refer to the XA-SIC® DIG RP-20 Factory Specifications.
Inquire Now
If you have any questions, please leave us a message, we are happy to serve you
Recommended Products
Contact Person: Hu Manager
Tel：15715853015
Email：964253538@qq.com
Address: No. 2 Pingjiang Road, Zhongguancun·Shaoxing Shumuwang Science Park, Didang Street, Yuecheng District, Shaoxing City, Zhejiang Province